ISO NK35/30 needle roller bearings

da min:40.5 mm; r1a max:0.6 mm; Characteristic rolling element frequency, BSF:7.34 Hz; d:35 mm; Axial displacement K Factor:0.73; f0:8.05; D2:56.71 mm; Precision class:P4S; Dynamic load, C:9.9 kN; Preload value:0.25 kN;

Manufacturer Name:NTN; Minimum Buy Quantity:N/A; D:80 mm; r1a max:1.5 mm; Category:Bearings; C:14.29 mm; Brand:NTN; Weight / Kilogram:0.001; Inventory:0.0; Min operating temperature, Tmin:-40 °C;

G:M6x1; Adapter sleeve reference:HLK2309; d1:62 mm; Z:70.2 mm; A1:32 mm; H:54.2 mm; Weight:2.04 kg; Dz:95 mm; T max.:100 °C; H2:108 mm;

T max.:100 °C; J:118 mm; C:19.5 kN; A:40 mm; B:38.1 mm; H1:17 mm; H2:82 mm; S:15.9 mm; N:14mm; N1:22 mm;

Brand:SNR; B:64 mm; Y0:2.63; Da max:216 mm; Max operating temperature, Tmax:200 °C; D:230 mm; Mass:10.6 kg; Characteristic outer ring frequency, BPF0:7.61 Hz; d:130 mm; Number of lubrication holes:3;

C:25.7 kN; A:34 mm; B1:38.9 mm; J:130 mm; L:90 mm; s1:30.2 mm; S:9.5 mm; B:25.4 mm; N:16mm; d1:51.1 mm;

C0:44.8 kN; A:44 mm; C:71.5 kN; Weight:3.87 kg; H:150 mm; d:55.56 mm; A3:3.5 mm; T min.:-20 °C; SW:5.56 mm; A5:41 mm;

T min.:-20 °C; Designation of housing:PA209-; E:25 mm; A1:32 mm; d:42.86 mm; T max.:100 °C; C0:20.8 kN; S:10.2 mm; L1:42 mm; Designation of bearing:US209-27G2;

B:18 mm; Brand:NTN; Radial clearance class:CN; Static load, C0:31.5 kN; Mass:0.55 kg; Dynamic load, C:33 kN; d:90 mm; Da max:118.5 mm; Nlim (grease):2,900 rpm; rs min:1.1 mm;

Characteristic outer ring frequency, BPF0:3.91 Hz; rs min:2 mm; Brand:NTN; ra max:2 mm; Min operating temperature, Tmin:-40 °C; Nlim (oil):6,000 rpm; Max operating temperature, Tmax:120 °C; Product Group:B04270; F:64.5 mm; dc min:74 mm;

L2:10 mm; C0:6.65 kN; A2:21 mm; Recommended tightening torque for set screw:5.5 Nm; Weight:0.81 kg; T max.:200 °C; s1:15.5 mm; d:12 mm; T min.:-20 °C; L:94 mm;

Designation of open end cover:SCOU207-20; L:129 mm; C:25.7 kN; H1:89 mm; L3:64 mm; SW:3.97 mm; Z:59.1 mm; Designation of closed end cover:SCC207; G:M6x1; A2:30 mm;

A:33.5 mm; L:116 mm; Weight:1.74 kg; A1:14.5 mm; T min.:-20 °C; e:19 mm; S:8.5 mm; B:25.4 mm; Z:56.8 mm; N:14mm;

Ball Material:Steel; Grease Type:Unirex N2; Flinger Material:Steel; Self Aligning:Yes; Ship Weight:12.9 LB; Housing Type:2 Bolt Pillow Block; Housing Material:Cast Iron; Shaft Attachment (2):Grip Tight; Ball Bearing Housing Series:214 Series; UPC:782475879472;

A4:36 mm; Recommended tightening torque for set screw:22 Nm; L:195 mm; T min.:-40 °C; A2:63.8 mm; S:30.9 mm; Designation of housing:FC212-; J:160 mm; G:M6x1; C:52.5 kN;